E53 Doppel-DIN

This totally handmade Double-DIN Bezel fits for all today known double-din devices.
Next we did a lot of d-din installations and are familiar with the following devices
For devices, which are not listed below, please click on "individual" and send us your panel-size.
We will produce an individual sized bezel for you

all Alpine IVAs
all Pioneer AVICs AVHs
all Kenwood DDX, DNX
all JVCs
all CLARIONs
all ZENECs MCs no mc292,sorry too large
all ECLIPSE AVNs
all Panasonic STRADAs
individual give us 1 week time to size it for you
Individual are not supported at the moment (1.5.2009)

For devices which are not in list above, click "individual" and
send us the sizes. Max. High must not exceed 103mm panel high

Construction:

made out of 350 Gramm polymer, hardened in a special way, resistend up to 212 F° temperature
revolving gap 1mm !! to D-Din device
surface totally free of errors, 2K mat deepback thermo brushed
Therefore 2 different panel sizes with differnent cutout sizes in stock (only branded devices atm)
inner frame without offset, so depth adjustment due various panel thickness possible
therefore perfect flush of bezel and device at all corners, no nasty overlap of thick displays
Bezel totally decoupled of the device and stress-free
no creaking, clattering or scouring at brushed surface
bezel backside 4 adjust pins inside, ideal adaption for additional E53 Mounting-Kit (adjust pin-grommet-system)
rearside totally flat for adaption of individual mounting holders
you get a 15-paged install instruction,step-by-step, with all details

Bezel Raw unpainted

like prejor, but raw, semi-glossy
no stopping necessary
surface already free of errors
can be directly painted

E53 D-DIN Bezel - 99,00 EUR
E53 D-DIN Bezel Raw - 69,00 EUR

We recommend:

E53 Double-DIN Mounting-Kit

X5 E53 Double-DIN Impressions